Robust luminaire, IP23 for T5 and T8 tubes made of galvanized steel.
Multi-position mounting system of lamp holders in the universal end-cap
made of plastic allows to use the luminaire both in low (less than 3 m)
and high (more than 10m) rooms. Especially recommended for warehouses, manufacturing plants, shops and sports facilities. Luminaire is offered without the light source.
Reflector: High performance aluminum reflector made of Miro 5- thickness
0,3 mm. Specially designed to achieve the highest efficiency (up to 95%).
End cap: Resistant to UV- radiation and temperature changes - made of PP.
Adjustable light distribution by changing the position of lamp holders
placed in the appropriate holes (wide, narrow and very narrow shape).
Seven different curves for T5 and two for T8 fluorescent lamps.
Diffuser: aluminum louver- available as an accessory for a wide light
distribution in buildings with low ceiling height.
Can be supplied with emergency lighting system
Possible to connect with presence and daylight sensors
Version for quick installation - Wieland plugs and sockets
The luminaire is also available in IP20 without metal end-cap
Mounted directly to ceiling or suspended on horizontal wire with an additional
accessory - two steel suspension brackets with locking screws.
Cable entry in each end or alternatively in the middle of the fixture
through the gland Ø = 20mm.
LS1: one 5 pole push-in terminal block next to the hole in the middle
of the fixture. Three-phase electrical wiring possible.
LS2: two 5 pole push-in terminal block placed at each end of the fixture
connected with 5 x 2,5mm² cables. Three-phase electrical wiring possible.
The luminaire is supplied with a branded electronic ballast (EVG), warm start,
A2 class. Dimmable versions: 1-10V, DSI or DALI available at the request.
Click here and download leaflet INDUSTRY IP23!
Other products from the INDUSTRY LED